Intermodule Measurements - HP 16534A User Reference

Intermodule Measurements

If you set the oscilloscope module to Group Run in the Intermodule
module menu, the oscilloscope waits until it is armed by the input port
or by another module before it begins to search for its own trigger
condition. By using the Group Run option you can time-correlate the
measurements from various modules (for example, the oscilloscope
and a timing analyzer) and display data from several modules on one
display.
If you set the oscilloscope module to Independent in the Intermodule
Menu, the oscilloscope will be in the free-run mode and the waveform
display will not be synchronized with the other measurement modules
in your system.
Pattern duration trigger cannot be used when the oscilloscope is
armed by another module or by BNC PORT IN as set up on the IMB
menu.
More information about intermodule applications can be found in the
HP 16500/16501A Logic Analysis System User's Reference and the
HP 16500/16501A User's Guide.
6-19