Manual Time Markers Options
When you touch the T Markers field on the display, a pop-up menu
appears. When you touch the On field in the pop-up to turn
T Markers On, you can manually move the Tx and To markers to make
time measurements.
When you touch the On field in the T Markers menu, three new fields
appear to the right of the T Markers field: Tx to To, Trig to X, and Trig
to O fields. These fields allow you to position the Tx marker and the
To marker by entering time values for these markers. When time
markers are turned on and voltage markers are turned off, the channel
label field displays voltage values for the Tx and To markers except
for waveforms where Overlay mode has been selected in the
Waveform Selection menu.
5-5