Screen Saver; Visual Alarm; Types Of Main Screen; Switching The Basic Display To Simplified Screen - Labnet C0336 User Manual

8.12 Screen saver

Setting time of screen saver

8.13 Visual alarm

Visual alarm

8.14 Types of main screen

Default setting is BASIC DISPLAY.
To switch to SIMPLIFIED SCREEN, follow the rules in section 9.3.1.
Types of main screen
BASIC DISPLAY

8.14.1 Switching the basic display to simplified screen

8.14.2 Switching the simplified screen to basic display

CONFIG / SCREEN
• Press SET.
• With ▲▼◄► keys select SCREENSAVER.
• Press SET.
• With ▲▼ keys select demanded value from 1 to 60 minutes.
• Mark selection by pressing SET.
• Leave the menu by pressing BACK.
CONFIG / SCREEN MODE
• Via ▲▼ keys choose VISUAL ALARM
• Mark it by pressing SET.
VISUAL ALARM cause blinking screen after ending of centrifuging
or after error occurring.
SIMPLIFIED SCREEN
• Press SET (to enter edit mode).
• Via▲▼◄► keys select MENU (blinking).
• Press SET.
• Via◄► keys select CONFIGURATION tab.
• Press SET.
• Via◄► keys select SCREEN tab.
• Press SET.
• Via◄► keys select BASIC DISPLAY tab.
• Press SET.
• Leave menu Via BACK key.
Press the BACK button for 1 sec. to return to the basic display
(a short menu is displayed on the screen), then:
Centrifuge user manual | 23