Setting Up Rpm, Rcf, Time, Temperature - Labnet C0336 User Manual

6.4 Setting up RPM, RCF, TIME, temperature

On the main screen, it is possible to set:
rotating speed - RPM
relative centrifugal force
centrifuging time
centrifuging temperature
Exemplary change of SPEED setting:
Exemplary change of RCF setting:
Exemplary change of TIME setting:
SPEED
RCF
TIME
TEMP (R only)
• Press SET (to enter edit mode).
• With ▲▼◄► keys mark SPEED fold (blinking).
• Press SET.
• Choose demanded order of magnitude
by pressing ◄►, e.g.: 926 (9 - blinking).
• Set demanded value by pressing ▲▼.
• Repeat above two steps for other orders of magnitude.
• Confirm set value by pressing SET.
• Leave edit mode by pressing BACK.
• Press SET (to enter edit mode).
• With ▲▼◄► keys mark RCF fold (blinking).
• Press SET.
• Choose demanded order of magnitude
by pressing ◄►, e.g.: 926 (9 - blinking).
• Set demanded value by pressing ▲▼.
• Repeat above two steps for other orders of magnitude.
• Confirm set value by pressing SET.
• Leave edit mode by pressing BACK.
• Press SET (to enter edit mode).
• With ▲▼◄► keys mark TIME fold (blinking).
• Press SET.
• Choose demanded order of magnitude
by pressing ◄►, e.g.: 13:18:00 (1 - blinking).
• Set demanded value by pressing ▲▼.
• Repeat above two steps for other orders of magnitude.
• Confirm set value by pressing SET.
• Leave edit mode by pressing BACK.
Centrifuge user manual | 11