Troubleshooting For Charging; What To Do When Charging Is Not Possible - Mazda MX-30 2022 Owner's Manual Leaflet

Table of Contents

Advertisement

What to do when
charging is not possible
▼ What to do when charging is not
possible
If trouble arises while charging such as
not being able to charge the high
voltage battery, refer to the following
table. If the problem cannot be solved
even after checking the following table,
there may be a problem with the
vehicle or charger. Contact an
Authorized Mazda Dealer.
Charging is not possible.
Cause
The selector
lever is in a
Shift the selector lever to the P
position
position.
other than P.
The high
voltage bat-
Charging is not performed when
tery is al-
the high voltage battery is al-
ready fully
ready fully charged.
charged.
The high
Check the high voltage battery
voltage bat-
temperature gauge in the instru-
tery temper-
ment cluster. If the high voltage
ature is ex-
battery temperature gauge is in
tremely high
the red or blue range, charging
or low.
may not be possible.
If the instrument cluster does not
The
turn on even if the power switch
Lead-acid
is switched ON, the Lead-acid
battery is
battery may be depleted. Charge
depleted.
or replace the Lead-acid battery.
Action

Troubleshooting for Charging

Normal charging is not possible.
Cause
Check if a ground-fault circuit in-
terrupter has operated or if a
The outlet
power outage occurred. If the
has no pow-
power source has a timer func-
er.
tion, electrical power may not be
supplied to the outlet until the
time set to supply power.
The charge
plug is not
Check if the charge plug is prop-
properly
erly plugged into the outlet.
plugged into
the outlet.
The charge
connector is
Check if the charge connector is
not properly
properly connected.
connected.
Cancel the charging timer using
Charging
EV Settings in Mazda Connect,
timer is set.
or the charging timer cancella-
tion function.
Troubleshooting for functions using a
Smartphone or computer
If you are having trouble with the
remote function service, such as when
the remote function does not work,
refer to the Connected Service owner's
manual.
If Trouble Arises
Action
7-11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents