RGBlink X3 User Manual page 44

Transition Time: Users can slide the bar to set the transition Time, rang from 0-10s
Preview Logo Setting: Hide or Display the "Preview" logo on the preview monitor.
Black Out: On or Off
Auto Take: doesn't work under Preview Mode
CUT:switch PST to PGM display instantaneously
Take:swtch PST to PGM in transition time.
Link Mode
Click the "Link Mode", and pop-up window as follows:
Click "OK", the system will synchronize the data, and it will finish about 5 seconds later, click "OK",
it will enter the interface as follows:
The link mode can achieve 5 pictures to 5 pictures seamless switching. It needs to connect
output 6 and output 8 to the inputs ports that support for same signal, for instance, if output 6 is
DVI connector, then link it to DVI input or HDMI input via adapter; if it is HDMI output, link it to
HDMI input or DVI input via adapter; but if it is SDI output, link only to SDI input.
X3 User Manual
43