RGBlink X3 User Manual page 29

Output Setting
Click "Monitor" shortcut , it will enter the interface as follows:
In videowall mode, there are max 16 image in the output interface, group of two outputs, one
output module can display 8 images.
Split Mode: Default quick split "OFF". User can enable the quick split function by sliding the
switch to "ON". LED type and LCD type can also be selected by sliding the monitor type switch,
specific as follows:
LED Type: Default LED type. In LED type, user can select equal type and unequal split type.
Equal Type: User can custom the H total, V total, row and column, for example, set H total as
7680, V total as 4320, Row and Column as 4, as shown in the figure below:
The layout is shown in the figure below:
X3 User Manual
28