RGBlink X3 User Manual page 28

Mirror: Enable or disable the mirror function, default "OFF".
Bypass Mode: Enable or disable the bypass mode. When select "ON", the output format will be
the same with the input format.
Alpha: Set the alpha, the adjustment range is 0~128.
Sharpness: Set the sharpness, the adjustment range is 0~100.
Brightness: Set the brightness, the adjustment range is 0~100.
Contrast: Set the contrast, the adjustment range is 0~100.
Saturation: Set the saturation, the adjustment range is 0~100.
Color Term: Set the color temp (red, green and blue), the adjustment range is 0~100.
Reset: Select "Reset", the input property will be recover to factory setting.
Refresh Signals: Right click the input and select "Refresh Signals". If there is signal, it will show
the input format, or it will show "No Input".
USB Player: Right click the USB input, and select "USB Player", it will enter to the USB Player
interface, including movie and picture, default play the USB movie.
USB movie player setting: Can select play in order, random, single cycle and all cycle, switch to
pre or next, pause or play, and read the movie name, progress bar and time.
USB picture play time: Click the picture, it will display the setting interface, default the time is 0s.
Set the switch time, and click "Set".
USB picture player setting: Can select play in order, random, single cycle and all cycle, and
switch to pre or next, pause or play.
USB Upgrade: Put the file in the form of MERGE.bin to the USB disk root directory, and connect
to the USB input. Right click the USB input, and select "USB Upgrade" to begin to upgrade USB.
(Note: upgrade is only for the USB port that connected, user need to upgrade the four USB ports
respectively.
Reset Name: Reset the changed name.
X3 User Manual
27