RGBlink X3 User Manual page 34

mouse, then the layer will be moved, release the mouse when moved to the suitable location. But
this method can only adjust the size and location roughly, if an accurate adjustment is needed,
the second method can be used.
b. Select the layer to be adjusted, and set the X, Y, width and height in the bottom of the interface.
Hierarchical relations between layers: After creating the layers, the hierarchical relations can
be changed by the following: click the shortcut key bring layer to top " ", bring layer to
bottom " ", layer forward " " or layer backward " ". The layer can be set as
background by click " " and click " " to remove the layer background.
Close one layer or all layers: Click the icon on the top right corner of the layer to close
one layer, or click the shortcut key " " to close all layers.
Lock the layer: Click the icon
on the top right corner of the layer to lock the layer, the layer
can't be moved or adjusted if be locked.
Layers Group: If user need to move two or more layers at the same time, long press the button
G, and click the layers that to operate, then release the button G, the selected layers will be
grouped, which can be moved or scaled easily.
Full the layer: Click the icon on the top right corner of the layer to full cell, and click the
icon to full screen.
Copy and paste bank: Select the bank that to copy, and click the copy bank shortcut "
" on
the right side of the interface, then select the bank that to paste, and click the paste bank shortcut
" ". The selected layer will pasted to the bank.
Adaptive: If scale the output area to a large area, click the adaptive shortcut " " on the right
side of the interface, the output area will be return to the best position.
Layer Property Setting: Select the layer to be adjusted, click the More shortcut "
"
in the bottom of the interface, and enter the interface as follows:
X3 User Manual
33