Climatronic On Board Diagnostic (OBD) through m.y. 2001
Output Diagnostic Test Mode
Self test
Function is not recognized or cannot
be performed at the moment!
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
Indicated on display:
The following tests are performed:
A/C control head -E87- display
Page 01-34
Functional test of the 4 flap
motors
Electrical circuit to fresh air
blower -V2- is tested.
Climatronic control module
switching sequence for A/C
clutch -N25- is tested.
All sensors are checked.
After approx. 30 seconds, the
checks are completed.
Indicated on display:
- If "Function is not recognized or
cannot be performed at the
moment" appears in display,
output DTM has been concluded.
- Press
button.
Note:
After completing output DTM, always
check DTC memory
Página 28 de 52
01-33
Page 01-12
.
13/2/2005