Heating and ventilation system, servicing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
- Remove screws -arrows-.
- Remove center trim.
- Remove controls with cables
attached.
- Disengage cables from controls.
- Disconnect electrical connectors.
After removing controls, check all
cables for free movement.
- Move cables back and forth in
direction of arrows.
- Replace cables that are damaged
or hard to move.
Installing
Note:
Cable sleeve ends are color
coded.
All air flaps must audibly move
onto end stops when turning
controls.
Always check cables before
installing. Replace binding or
damaged cables.
Página 19 de 36
80-16
13/2/2005