A/C refrigerant system
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
WARNING!
- Electric welding near refrigerant hoses
causes R-134a to decompose from
ultraviolet light. Discharge system before
electric welding
- Pressurized R-134a refrigerant in the
presence of oxygen may form a
combustible mixture. Never introduce
compressed air into any R-134a
container (full or empty), A/C component
or piece of service equipment
- Do not expose any component of the
A/C system to high temperatures (for
example, open flames). Excessive heat
will cause a pressure increase which
could burst the system
- Do not steam clean condensers or
evaporators. Use only cold water or
compressed air
Página 3 de 21
87-71
13/2/2005