Climatronic On Board Diagnostic (OBD) through m.y. 2001
Rapid data transfer
Select function XX
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
Climatronic Control Module -J255-,
coding (function 07)
Note:
Each replacement Climatronic control module -
J255- must be coded after installing.
Perform Basic setting (function: 04) after
coding.
The A/C control head - E87 flashes for 15
seconds when the control module -J255 has not
been coded.
If the appropriate vehicle code or the
appropriate equipment level is not displayed,
the control module must be coded as follows:
- Connect VAG 1551 Scan Tool (ST), enter
address word 08 "AC/Heating electronics" and
press
display
Indicated on display:
HELP
- Press buttons -0- and -7- to select function 07
Code control module.
until "Select function XX" appears in
Page 01-8
.
Página 36 de 52
01-41
13/2/2005