Volkswagen Golf 1999 Service Manual page 3729

Heating and ventilation system, servicing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
Fig. 5 Instrument panel cross
member, loosening and
tightening
- Remove bolts -arrows-
Tightening torque: 25 Nm (18 ft.
lb.)
- To access or remove heating unit
and surrounding parts, lift cross
member in direction of arrow -A-
and support.
Note:
To avoid damage to the steering
column, have a second
technician assist.
If removed components are not
to be re-installed immediately,
secure cross member to the
bulkhead.
Any wiring harnesses released
from their retainers must be
secured again at the same point,
using the same retainers.
Página 12 de 36
80-9
13/2/2005