Volkswagen Golf 1999 Service Manual page 3831

Climatronic
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
Installing
Replacement flap motors are
supplied in the "recirculating air"
position. To ease the installation,
first do the following:
- Connect electrical connector -1-
to flap motor -2-.
- Switch on ignition.
- Operate button for fresh
air/recirculating air.
When the center position has been
reached:
- Disconnect electrical connector -
1- from flap motor -2-.
- Insert flap motor in fresh
air/recirculating air shaft -1-.
If the flap motor cannot be attached
to the fresh air/recirculating air flap
shaft -1-, remove fresh air blower -
V2-, Page 80-7 , Fig. 3 and attach
flap by hand.
- Turn flap motor in direction of -
arrow A- and tighten bolts.
- Attach operating rod for air flow
flap.
Through m.y. 2001: Initiate Basic
setting, function 04 using VAG 1551
Page 01-1 or VAS 5051
87-29 .
From m.y. 2002: Initiate Basic
setting, function 04 using VAS 5051
Page 87-29 .
Página 44 de 61
87-56
Page
13/2/2005