Heating and ventilation system, servicing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
Fig. 1
Central flap lever,
installing and adjusting
The central flap pinion has an
adjustment mark.
- Install the lever so that the
notches on the lever and the
pinion align -arrows-.
Fig. 2
Heater core/bulkhead
seal, installation
position
The seal between the heater core
and the bulkhead has a positioning
mark.
- Install seal -1- so that the notches
on the seal and the base plate -2-
align -3-.
Página 26 de 36
80-21
13/2/2005