Manual A/C
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
Fig. 1
Temperature flap cable,
installing and adjusting
Prerequisites:
Heating and A/C controls are
installed.
Connecting duct removed
Page 80-10
.
Adjusting
- Turn temperature rotary control
knob to left onto stop.
- Attach center wire of cable -1- to
temperature flap lever -2-.
- Push temperature flap lever -2- to
stop -arrow A- and secure outer
cable -1- with clip -3-.
- Turn temperature rotary control
knob to left and right onto stops.
When turning the rotary control
knob, both end stops must be
reached.
Página 21 de 34
87-15
13/2/2005