Manual A/C
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
Fig. 1
Evaporator water drain valve,
checking
- Fold cover -1- in bulkhead insulation mat
upwards.
- Remove drain valve -2- from opening in
bulkhead -4-.
Check water drain valve as follows:
The water drain valve must not be stuck.
Insulation mat must not be deformed or
damaged in area of valve.
The opening in the sealing cap of the water
drain valve must point down.
Note:
When the cover cap -1-is closed, it must be flush
with the insulation matting. If the cover cap
pushed in too far, the water drain valve sealing cap
-2- can jam.
Página 34 de 34
87-24
13/2/2005