CARDIOSTRONG TX-50 Assembly And Operating Instructions Manual page 16

Step 4: Mounting the handle bar
Mount the safety bar (12) on the upright
post with the screws (18).
Step 5: Mounting the console
1. Remove the screws (19), which are
mounted on the bracket.
2. Place the console (D) on the console
holder.
ड ATTENTION
Take care not to pinch the cables during
the following steps.
3. Connect the PCB cables (9a) and (10a).
4. Connect the hand pulse cables (9d) and
(10d).
5. Connect the hand pulse cables A (9e)
and (10e).
6. Connect the cables for speed measuring
(9b) and (10b).
7. Connect the cables of the incline control (9c) and (10c).
8. Mount the console on the bracket with four screws (19).
16
TX50