Assembly - CARDIOSTRONG TX-50 Assembly And Operating Instructions Manual

2.3

Assembly

Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
NOTICE
L
First loosely screw all parts together and check that they fit properly. Then tighten the screws
using the tool only when you are instructed to do so.
Step 1: Mounting the handle holder (upright post)
1. Remove the screw (15) and the nut (16) from the right and the left sides of the base frame (2)
(left figure).
2. Put the console upright posts and the handles up (right figure).
3. Re-tighten the screw (15) and the nut (16) on both sides of the base frame.
14
TX50