SSANGYONG KYRON 2007.04 Manual page 645

05-6
3170-01
2) Function of N Switch
▶ Aids a smooth start of the vehicle by raising the RPM during the gear shifting when
the engine is cold.
When the vehicle is trying to start from the stopped state (vehicle speed below 3 km/h), the N
switch determines the shifting timing by using the clutch switch and the N switch. It raises the
engine RPM (100 ~ 200 rpm). Operation conditions are as follows.
- The vehicle speed is at the stopped state (Vehicle speed below 3km/h detection).
- While depressing the clutch (Clutch switch detection).
- The gear lever is at a position other than neutral (N switch detection).
- Start the vehicle while depressing the clutch pedal (Clutch switch detection).
- The RPM increases in accordance with the temperature of the engine coolant
(Engine coolant temperature sensor detection).
: appx. 100 rpm increase
: appx. 100 ~ 170 rpm increase
: appx. 80°C (normal temperature of the engine coolant): around 200 rpm increase
- When the gear has been smoothly shifted and the vehicle speed exceeds 3km/h, it returns
to the previous operation interval of the engine RPM.
In case of Kyron, the N switch signal is transmitted to the instrument panel, and then the
instrument panel transmits it to the engine ECU through the CAN communication.
Vehicle Made After 04.09.15
M/T
KYRON 2007.04
Kyron