SSANGYONG KYRON 2007.04 Manual page 161

10-6
8510-23
3. HOW TO OPERATE CRUISE CONTROL SWITCH
1) How To Set Speed
1. To operate the cruise control system, accelerate the vehicle to the speed within the specified
range below with depressing the accelerator pedal.
- Cruise control operating range: between 36 km/h (22.37 mph) and 150 km/h (93.207 mph)
2. When the desired speed is reached, which should be within the above range, push up the
cruise control switch lever to ACCEL side (upwards arrow), or push down the switch lever to
DECEL side (downwards arrow).
And then release the accelerator pedal slowly.
3. Now the vehicle is cruised by this system with the set speed. You don't need to use the
accelerator pedal.
4. Refer to the following pages for details of operation.
Never use the cruise control system until you get used to it.
Improper use or not fully aware of this function could result in collision and/or personal
injuries.
CRUISE CONTROL SYSTEM
KYRON 2007.04