SSANGYONG KYRON 2007.04 Manual page 513

3. OPERATION OF HDC INDICATOR CONTROLLER
This table describes the coming-on and blinking mode of HDC indicator according to the HDC
switch operation (ON/OFF).
The HDC indicator on the instrument panel has two modes; green (function lamp) and red
(warning lamp). The HDCswitch is a push & self return type switch ? when you press it once, it
starts to operate and when you press it again,it stops the operation.
- Basically, the brake system's basic functions can work even when there are problems with
the HDC system.As given in the table above, the HDC warning lamp comes on when:
Initial ignition ON
·
HDC system error occurs
·
Brake system overheat
·
05-15
8010-01
CLUSTER
KYRON 2007.04