SSANGYONG KYRON 2007.04 Manual page 499

04-12
7410-13
▶ Error Detection
After the motor starts to drive, if the position sensor value doesn't change for about 3
seconds during the seat slidingor seatback reclining adjustment and for 1.6 seconds during
the seat cushion height adjustment, it is determinedthat the harness circuit is open or the
sensor failure occurred.
If an error is detected,
▶
The memory recall operation stops. However, the seat can be adjusted by manual
switches.The memory recall operation can be activated after the failure is corrected. This is
determined when the systemdetects the value changes from the position sensor. This is
called the Release of automatic control stop
▶ Relay Protection
Once the relay is turned on, it will not be turned off within 60 ms.
▶ Specifications
- Rated voltage : DC 12 V
- Operating voltage : DC 9 ~ 16 V
- Current consumption : Max. 500 mA (not including the load)
-
Operating temperature range : -30°C ~ 75°C
-
Reserve temperature range : -40°C ~ 85°C
- Parasitic current : Max. 2 mA
SPWM
KYRON 2007.04