SSANGYONG KYRON 2007.04 Manual page 496

4. CONTROL AND OPERATING CONDITIONS
1) Seat Position Memory
▶ Seat Position Memory Operation
- To store the seat position and the outside rearview mirror position, press the SET button
and, within 5 seconds,press one of position switches. The memory setting is available
for up to 3 different drivers.
- The memory set mode is only available within 5 seconds after pressing the SET button.
- If any of the following conditions is met, the memory set mode is canceled.
No switch inputs within 5 seconds after pressing SET button.
·
When adjusting the seat or outside rearview mirror positions during the memory recall
·
operation.
When turning off the ignition switch.
·
When pressing the STOP button
·
When the memory setting is completed.
·
- The memory recall is not available when the vehicle speed is over 3 km/h or the gear
shift lever is not in "P"position with the parking brake released.
- The memory set can be unlimitedly renewed.
- The stored positions are erased when disconnecting the battery cables.
- The buzzer sounds once if the memory set mode is activated.
- The buzzer sounds twice if the memory setting/recalling is completed.
- The buzzer sounds three times if an error is found in the sensor during the memory
recall operation.
04-9
7410-13
SPWM
KYRON 2007.04