SSANGYONG KYRON 2007.04 Manual page 45

01-24
6810-15
2) Coolant Circulating Route
3) Connecting the Coolant Circuit
The heater is connected to the coolant circuit in the coolant feed pipe from the vehicle engine to
the heat exchanger.
- Parts conveying coolant must be routed and fastened in such a way that they pose no
temperature risk to
person or material sensitive to temperature from radiation and direct contact.
- Before working on the coolant circuit, disconnect the negative battery cable and wait until
all components have cooled down completely.
- When installing the heater and the water pump, note the direction of flow of the coolant
circuit.
- Fill the heater and water hoses with coolant before connecting to the coolant circuit.
- When routing the coolant pipes, observe a sufficient clearance to hot vehicle parts.
- Protect all coolant hoses/coolant pipes from chafing and from extreme temperatures.
- Secure all hose connections with hose clamps.
AIR CONDITIONER
KYRON 2007.04