SSANGYONG KYRON 2007.04 Manual page 195

01-30
0000-00
2) Job procedures
1. Always keep the workshop and lift clean (especially, from dust).
2. Always keep the tools clean (from oil or foreign materials).
3. Wear a clean vinyl apron to prevent the fuzz, dust and foreign materials from getting into fuel
system.
Wash your hands and do not wear working gloves.
4. Follow the below procedures before starting service works for fuel system.
5. If the problem is from HP pump, fuel supply line or injector, prepare the clean special tools
and sealing caps to perform the diagnosis for DI engine fuel system in "DIAGNOSIS"
section in this manual.
At this point, thoroughly clean the related area in engine compartment.
- Clean the engine compartment before starting service works.
Tool kit for
high pressure line
ENGINE D20DT
KYRON 2007.04
Took kit for low
pressure line
Removal tool box and
cap kits