SSANGYONG KYRON 2007.04 Manual page 514

05-16
8010-01
4. ESP WARNING LAMP
1) ESP Warning Lamp Blinking in Control
ESP warning lamp blinks when ESP control is activated. If the activation reaches a certain
limitation, a beep soundsto warn the driver. The ESP warning lamp goes off when ESP function
is deactivated. Even when the ESP isoperated for a very short period of time, the ESP warning
lamp blinks minimum of 4 times every 500 milliseconds.
ESP operation
(including TCS)
ESP warning lamp
▶ When receiving CAN data
- LAMP: (200h, 1.5) ESP - INFO - BL: when receiving data, 500 ms on/off
- BUZZER: (200h, 1.4) ESP - INFO - BUZZ: when receiving data, 100 ms on/off
2) ESP System Cancellation Using the ESP OFF Switch
When the ESP switch is pressed (for over approximately 150 ms), the ESP system will be
cancelled and thevehicle will be driven regardless of the output values from the corresponding
sensors. Then, the ESPwarning lamp on the instrument panel comes on.
▶ The detailed operation procedures are as follows:
- The ESP warning lamp comes on when the ESP OFF switch is pressed for over 150 ms.
- The switch returns to normal position when the OFF switch is released.
-
The ESP system will be cancelled after approximately 150 ms.
Based on the above procedures, we can see that the ESP system will be cancelled after a
certain period (approx.150 ms) from releasing the switch to the original position. The ESP
system does not get canceled immediatelywhen the ESP warning lamp is turned on by pressing
the ESP OFF switch.When you turn the ESP system off by pressing the ESP switch for over
150 ms, the TCS system is turned off. And thebasic ABS system will operate.
CLUSTER
KYRON 2007.04