Table of Contents
Advertisement
3. OPERATION
1) Setting a Desired Speed
1.
To operate the cruise control, accelerate to the desired speed, which must be more than 36
km/h and less than 150 km/h.
2.
When the desired speed is reached, push up the ACCEL switch of the cruise control lever or
push down the DECEL switch for 1 second per one switching and then release the accelerator
pedal slowly.
3.
Now, the vehicle is cruised by this system with the set speed. You don't need to use the
accelerator pedal.
4.
Refer to the following pages for details of operation.
Never use the cruise control system until you get used to it.
Improper use or not fully aware of this function could result in collision and/or personal injuries.
12-7
8510-23
Advertisement
Table of Contents
Troubleshooting
