02-22
[Pause time of vehicle speed sensitive INT wiper]
Cautions for wiper control
1. Speed sensitive INT (intermittent) wiper
1)
The wiper relay continues to output for remaining "ON" time even when the INT switch
is turned off during its operation.
2)
IGN switch "ON", INT switch "OFF": Resume the intermittent time when turning "ON"
3)
IGN switch "OFF", INT switch "ON": Resume the intermittent time when turning "ON"
2. Controls when the wiper motor parking is defective
-
The wiper relay continues to output when the parking terminal is fixed at the ground or
IGN while the wiper relay is "ON" (INT switch = ON or washer switch = ON)
(The output stops immediately after turning off the switch)
Pause time against vehicle speed