Specification Of Receiver; Remote Door Lock - SSANGYONG Actyon Sports II 2012.01 Manual

02-52
▶

Specification of Receiver

1. Operating requirements
- You should remove the ignition key.
2. Code registration requirement
- You can register the code only using the diagnostic device.
3. Transmitter code registration
a. You can register up to 5 transmission codes to the remote control key.
b. The receiver does not output the received code during registration.
c. Connect the device to the diagnostic terminal.
The code can be registered only by the panic signal from the transmitter.
(Other switches (LOCK/UNLOCK/ESCORT) can't code.)
▶

Remote Door Lock

1. All doors are locked when briefly pressing the door LOCK burron on remote control key (less
than 0.5 seconds).
2. The system outputs LOCK signal immediately after receiving the door lock message from the
remote control key. The system activates the theft deterrent mode when all doors are locked
while they are fully closed (the hazard warning lamps blink twice.).