SSANGYONG Actyon Sports II 2012.01 Manual page 674

01-8
(2) Step 2
The sensors and air mix door are checked for proper operation in this step. When the step 2 is
started, the number "2", which indicates that the system is in the step 2, apprears on the display
and the check for sensors is performed. Once the check is done (for 10 to 20 sec.), the one digit
number between 0 and 8 is added behind "2". "20" means there is no fault code. For the meaning
of the rest of the numbers, refer to the description below.
1. Turn temperature dial lightly toward right to enter step 2
If "-" is displayed before "2", it means
that the sensor for that flashing fault
code has a short circuit.
Ambient temperature
sensor short
circuited
Refer to the following table for the meaning of the fault code.
2. System starts sensor
check after "2" is
displayed
Fault code no. 1
(ambient temperature
sensor) blinks twice
10 to 20
sec.
3. Fault code for sensor
appears and blinks
Fault code no. 5 (sun
sensor) blinks twice
(fault codes appears
sequentially)