SSANGYONG Actyon Sports II 2012.01 Manual page 327

02-4
▶
Input Signals
NO. Input Signal Name
1 IGN1
2 IGN2
3 ALT_D
4 Key reminder switch
5 Driver's door switch
6 Passenger's door switch
7 Rear door switch
8 Hood switch
9 Driver's door lock/unlock switch
10 Passenger's door lock/unlock switch
11 Rear door lock/unlock switch
12 Tailgate lock/unlock switch
13 Rear defogger switch
14 Seat belt switch
15 Sunroof open switch
16 Parking brake switch
17 Air bag collision sensor
18 Wiper motor (parking) switch
19 Washer switch
20 INT-AUTO switch
21 Auto washer switch
22 Intermittent resistance
23 Speed sensor
24 Mirror lock/unlock switch
25 Front defogger switch
26 Auto hazard switch
Logic Status
ON = BAT
(IGN ON or START)
ON = BAT (IGN ON)
ON = BAT (engine started)
IN = BAT (key in)
OPEN = GND, CLOSE = OPEN
OPEN = GND, CLOSE = OPEN
- OPEN (one of rear doors) = GND
- CLOSE (all rear doors) = OPEN
OPEN = GND, CLOSE = OPEN
LOCK = OPEN, UNLOCK = GND
LOCK = OPEN, UNLOCK = GND
- UNLOCK (one of rear doors)
= GND
- LOCK (all rear doors) = OPEN
LOCK = OPEN, UNLOCK = GND
ON = GND, OFF = OPEN
Unfastened = GND, Fastened = OPEN
ON = GND, OFF = OPEN
ON = GND, OFF = OPEN
ON = 200 ms output (LOW), OFF = OPEN
STOP = BAT VOLTAGE, ROTATING = GND
ON = BAT, OFF = OPEN
ON = BAT, OFF = OPEN
ON = BAT, OFF = OPEN
0W ~ 51KW (for intermittent wiper)
ON = GND (PWM), OFF = OPEN
ON = GND, OFF = OPEN
ON = GND, OFF = OPEN
ON = GND, OFF = OPEN