SSANGYONG Actyon Sports II 2012.01 Manual page 673

▶ Step 5
- You can check that the temperature value from each temperature sensor is displayed
properly in this step. Pressing the defroster switch changes the temperature value that
appears on the display in the order as follows:
51
▶ Step 6
- To enter the step 6 from 5, turn the fan speed dial lightly toward the right not using the
temperature control dial. In this step, you can decrease or increase by up to 3 degrees
from the temperature set on the A/C controller.
2) Self-diagnosis step
(1) Step 1
Turn the ignition ON and press the OFF switch for 5 sec. or more within 10 sec.
Then the first step of the self-diagnosis is started as shown in the below figure.
1. Press OFF switch for 5 sec. or more
Ambient
temperature
display
Ambient
temperature
sensor
2. Display for checking VFD and all LED segments
Interior
temperature
display
Interior
temperature
sensor
01-7
6810-01
Intake air temperature
display
Intake air
temperature sensor