Setting A Desired Speed - SSANGYONG Rodius 2013 Manual

2. HOW TO OPERATE CRUISE CONTROL SWITCH

1) Setting a Desired Speed

1. To operate the cruise control, accelerate to the desired speed, which must be more than 36 km/h
(23 MPH) and less than 150 km/h (90 MPH).
2. When the desired speed is reached, push up the ACCEL switch of the cruise control lever or push
down the DECEL switch for 1 second per one switching and then release the accelerator pedal
slowly.
3. Now, the vehicle is cruised by this system with the set speed.
4. And you can set to other vehicle speeds again with above steps after an accelerator pedal
intervention during the cruise control running.
Never use the cruise control system until you get used to it.
Improper use or not fully aware of this function could result in collision and/or personal injuries.
(1) Manual transmission equipped vehicle
The cruise control is only available when the 3rd or higher speed gear is engaged.
12-5
8510-23