Operation; Operator Page - Normal Conditions; Operator Page - Alarm Conditions - ABB AWT210 Operating Instruction

AW T 2 1 0 | 2 - W I R E C O N D U C T I V I T Y, P H/O R P, P I O N T R A N S M I T T E R | O I/A W T 2 1 0 - E N R E V. C
7

Operation

Operator Page – normal conditions
Access level
Read Only
Calibrate
Advanced
Service
Write Protected
Figure 17 Example Operator pages – normal conditions
Operator Page – alarm conditions
If any of the diagnostic alarms are active the NAMUR status of the device is indicated by displaying the class
and category of the highest priority active alarm.
Alarm class
Failure
Check Function
Off Specification
Maintenance Required
Figure 18 Example Operator pages – alarm conditions
HART Tag (HART devices) or Tag Descriptor (FF and PA devices)
Operator
menu
Operator
Process values
Operator pages can be
configured independently
to display:
PV
PV + temperature
Calibration
page
PV + temperature + PV %
PV + temperature + OP
(HART devices only
Process
Calibration
menu page
Alarm category
19