Table of Contents
Advertisement
12
AW T 2 1 0 | 2 - W I R E C O N D U C T I V I T Y, P H/O R P, P I O N T R A N S M I T T E R | O I/A W T 2 1 0 - E N R E V. C
...5 Mechanical installation
...Transmitter installation
Wall mounting
Referring to Figure 12:
1 Position the left- and right-hand mounting brackets
the recesses on the rear of the transmitter as shown and
secure with the bracket securing screws. Ensure the plastic
washers remain in the positions fitted.
2 Mark fixing centers
B
and drill suitable holes in the wall.
3 Secure the transmitter to the wall using 2 screws
each mounting bracket.
NOTICE
If the optional weathershield
the transmitter and wall and pass 2 screws
fixing holes (both sides) in weathershield.
Dimensions in mm (in)
Weathershield dimensions
209 (8.22)
200
(7.87)
Figure 12 Wall mounting the transmitter
C
D
is used, position it between
C
through
Left hand bracket only shown –
right hand bracket omitted
for clarity
A
152 (5.98)
175 (6.89)
A
into
in
62
(2.44)
B
C
Optional weathershield
Advertisement
Table of Contents
