Preface - Emerson Rosemount BINOS 100 F Instruction Manual

ATEX Instruction Manual
HAS8xE-IM-ATEX
January 2004
The purpose of this manual is to provide additional information
concerning the components, functions, installation and maintenance of
EEx p pressurized MLT 2 and BINOS
installed and operated at hazardous locations, classified Zone 2, to
measure FLAMMABLE, but NON-EXPLOSIVE gases or gas mixtures.
The user should become thoroughly familiar with the operation of this
equipment before operating it.
Some sections may describe equipment not used in your configuration.
This ATEX instruction manual is a supplement to the analyzers standard
instruction manual! In addition to this manual, the manuals of all devices
necessary for operating the system must be observed. Read all manuals
completely to be familiar with the operation of this equipment at
hazardous locations.
Some technical specifications in this manual may be different to those
in the associated manuals for the analyzers and additional equipment.
In this case the technical specifications listed in this manual are valid
only.
Emerson Process Management Manufacturing GmbH & Co. OHG

PREFACE

    
100 F analyzers intended to be
MLT 2 / BINOS

100 F
P - 1