Sartorius Cubis Series Operating Instructions Manual page 65

Changing the Port Number
Changing Latency Time
Plug & Play Mode in Autoprint (SBI)
Installation Guides for Windows XP
and Windows 8 ®
If you use the USB interface with a program that limits the number of COM port
designations (e� g�, only COM1, 2, 3, 4), you may have to assign one of these port
numbers to the new virtual port�
Open the setting for the USB serial port in the Windows® Control Panel:
t
– START > My Computer > Control Panel
– System > Hardware > Device Manager
Open the Connections submenu�
t
Double-click on USB Serial Port�
t
Select Port Settings > Advanced�
t
Open the settings for the USB serial port, following the above instructions�
t
For a faster rate of communication, change the setting for the latency timer to
t
1msec�
Open the settings for the USB serial port, following the above instructions�
t
Stop the Plug & Play mode from running�
t
Uninstalling the Driver
The software driver for the USB connection can be uninstalled with the Windows®
Uninstaller�
Data Interfaces
, Windows Vista and Windows 7
® ®
Cubis MSE Operating Instructions
®
65