Modification Options - Sartorius Cubis Series Operating Instructions Manual

1
2
3
1
2

Modification Options

Setting Up the Display and Control Unit at the Place of Use
The display and control unit can be removed for all models to enable the operator
to customize the work space�
Removing the Retainer with the Display and Control Unit
Remove all items (such as weights) from the draft shield�
t
Carefully remove all parts as shown in the illustration�
t
1. Weighing pan
2. Pan support (not for MSE225... MSE125... models)
3. Shield plate/Draft shield
Keep all parts in a safe place�
t
Remove the panels (right and left)�
t
Models with the analytical draft shield:
1. Press on the locking tab�
2. Remove the panel�
Models with the milligram draft shield:
1. Press on the locking tab�
2. Remove the panel�
1
Keep all parts in a safe place�
t
2
Cubis MSE Operating Instructions
Getting Started
21