Table of Contents
Advertisement
3 USER INTERFACE
The touch‐screen can be used in the following ways:
•
Interface panel (unit interface) for a single heat pump
•
Network controller for multi heat pump installation
•
Network controller for multi heat pump and fan coil installation
•
Network controller for multi fan coil installation
To manage the system modularity, the interface foresees a home page which summarizes the whole plant, showing dynamically the
enabled resources and hiding the ones not available in the current configuration. The interface also provides a second summary
page including all the values of temperature and humidity detected in the system.
Through the menu it is possible to access to:
•
Plant configuration
•
Single units statuses
•
Zones, machines and plant settings
As alternative it is possible to directly access from the home page to detailed information, pressing on the display where are located
the summarized information. E.g., pressing where are located the main information of the heat pump, you can enter in the menu of
the heat pump status.
3.1 ICONS DISPLAY
All icons on the different screens can be shown in full colours or de‐saturated as in the following example:
The colour saturation indicates that icon is usable; when pressed the related function is performed.
The transparency (de‐saturated) indicates that icon is not usable and any touch on it has no resulting action.
For what concerns the side sliding bar which appears on the left side of the screen related to the single units connected into a
network (see Paragraphs 3.4.1.3 e 3.4.2.1), if an icon appears fully coloured the related function is enabled and, in that specific
moment is also active (i.e. if the "water anti‐freeze" icon of the heat pump is present and coloured, as shown below, the plate
exchanger electrical heating elements are switched on).
Instead, if the icon appears but is transparent (de‐saturated), the related function is enabled but not that moment activated (i.e. if
the "water anti‐freeze" icon of the heat pump appears transparent, as shown below, the plate exchanger electrical heating
elements are ready to work but currently switched off).
3.2 SCREENS AND ICONS
There might be some differences between screens and icons as they are currently shown. The Company reserves itself to modify
and update them without prior notice and in relation to what shown in the present manual.
7
Hi‐T
Centralized controller
Advertisement
Table of Contents
