Table of Contents
Advertisement
Hi‐T
Centralized controller
1. Scheduling of a day time‐line:
•
press on the day currently displayed to move to the next days and select a day;
•
choose if you want to set the way of operation in normal mode (press "Normal"), or Economy (press "Eco"), or if you want
to set to Off (press "Off");
•
check that after "Hour" appears the word "From" (if appears instead the word "To", you need to press it once to display the
word "From") and select the hour and minute (the minimum allowable variation is 15 minutes)for the beginning of the time
period;
• press once on the "From" in a manner that appears the word "To" and select the hour and minute (the minimum variation
permitted is 15 minutes) for the end of the time period;
• confirm the single time period pressing the green symbol of confirmation
•
afterwards you can observe that, correspondingly to the selected time period, you will see a time‐line bar of the colour of
the type of the selected set (if normal blue, green when in economy mode, no bar in "Off") ;
• repeat the above steps for all the time slots that you want to set on that particular day.
2. It is possible to copy the programming for a particular day in another day; to do this:
• select the day you want to copy the scheduling;
• press the copy icon
• select the day on which you want to copy the scheduling;
• press the paste icon
3. It is possible to erase the programming of certain day or of all days, to do this:
• press the delete icon
• at this point a screen will appear where you can select individual days to delete or select all the days;
• to confirm your selections, press the icon on the top right part
Figure 24. Chronothermostat, "Summer Chiller" page.
;
.
;
Figure 25. Chronothermostat, erase programming page.
;
.
30
Advertisement
Table of Contents
