Download Print this page

Set-Point Setup Page; Programs Page (Chronothermostat) - MAXA HI-T User's And Installer's Manual

Lcd touch-screen centralized controller for hydronic terminal coupled with n-i-hwak/wp v2/v2+ minichillers and i-hp/i-hp lt chillers

Table of Contents

Hi‐T

Centralized controller

3.6.2 SET‐POINT SETUP PAGE

Pushing on the icon above, you access to the page: "Set‐point setup".

From this screen you can set the chiller' set and fan coil zones configured. If enabled, you can also set the sanitary hot water set (see

Paragraph 4.6.2), the second set‐point (see Paragraph 4.9) and the offset for the climatic compensation(see Paragraph 4.10).

3.6.3 PROGRAMS PAGE (CHRONOTHERMOSTAT)

Pushing on the icon above to access the page "Programs".

From this page you can set the weekly program of chillers and fan coil zones separately. You can also program the legionella's cycle

and the production of hot water, if enabled (see Paragraph 4.6.5).

Figure 18. "Set‐point setup" page.

Figure 19. "Programs" page.

Table of Contents