Table of Contents
Advertisement
Hi‐T
Centralized controller
In addition, directly on the home page, you can get the following information about the fan coils:
•
Presence of fan coils connected in a network, if the symbol appears (Figure 8. Fan coil network.);
•
Dehumidification fan coil operation, if the symbol of the drops appears (Figure 9. Fan coil dehumidification.).
3.4.1 CHILLER SCREEN/HEAT PUMP
From the main page, by touching the symbol of the chiller (sensitive area number 1, Figure 5. Home page – indication meanings.),
you can access to the chiller on network screen.
From here you can access to the information related to the operations of the chiller; then you can uniquely identify each chiller
present, assigning each a name.
The information in the chiller's page are:
1. Temperature read in the chiller (about to a specific chiller):
a. Air temperature (°C)
b. Inlet water temperature (°C)
c. Outlet water temperature (°C)
2. Status and operation mode about a specific chiller
3. Active/activable functions (in the scroll bar on the left)
Sensitive areas (indicated by red boxes in the figure) in this page are:
1. Chiller name (each time you press on it, you go to the next chiller unit in the network; otherwise, with prolonged pressure,
you can rename the chiller)
2. Chiller/heat pump (with working signalling function given by the rotation of the fans); from here you access to an additional
page of information about that specific chiller.
3. Active alarms in the unit displayed
7. Icons of the navigation sidebar
8. Icons of the navigation sidebar
Figure 8. Fan coil network.
Figure 9. Fan coil dehumidification.
1
3
Figure 10. Chiller page – information and sensitive areas.
4
5
6
7
2
8
9
10
Advertisement
Table of Contents
