Graphically, it also contains information on the presence or absence on the following utilities:
10. Tank
11. Radiant panels
12. Sanitary
13. Solar.
On the main screen, in fact, it appears only utilities present and properly installed in the network or the active warnings at the time
of viewing.
If, for example, the network consists only of one or more chiller/heat pumps, without production of sanitary water and without
storage, the screen shows graphically the presence of the chiller, but inside the house do not appear other object; in this case the
appearance is the following:
Referring to the above figure is it possible to obtain the following information:
•
presence of chillers connected in the network (the chiller is correctly accepted when touching its figure you can access to
the pages dedicated to itself);
•
operating mode of the chiller (winter , summer , sanitary , OFF if does not appear the previous
three symbols);
•
operating status of the chiller (compressor running): the operation of the chiller shows graphically by the rotation of the
fans).
9
Figure 6. Home screen – only chiller is networked.
Figure 7. Chiller/Heat Pump.
Hi‐T
Centralized controller