Hi‐T
Centralized controller
4.6.3 SET‐POINT SETUP
To manage the set point of the different zones and of the chiller is necessary:
1. from the system main page, go to "Set‐point setup";
2. here you will find a list of the chillers and the areas previously assigned:
• CHILLER
• ZONE1
• ZONE2
• ............
3. Select chiller or zone of consideration;
4. possible settings are "Winter", "Summer", "Sanitary" for the chiller, "Winter" and "Summer" for the fan coil zones:
CHILLER
WINTER
Water set
Change the value of the set with the up and down arrows within the maximum and minimum limits indicated and confirm
ZONE n
WINTER
Set
Change the value of the set with the up and down arrows within the maximum and minimum limits indicated and confirm
Water set
Water set eco
Set eco
CHILLER
SUMMER
Water set eco
Zone n
SANITARY
Sanitary set
SUMMER
Set
Set eco
28