Hi‐T
Centralized controller
7. Status and mode of operation related to a specific fan coil (with fan speed)
8. Active/activable functions (in the scroll bar on the left)
Pressing the configuration symbol (Sensitive Area 4) leads to the setting of ventilation. The ventilation is changed for zones; hence
changing the ventilation of a fan coil of a given area, the changes are applied to the entire area. The page for setting the ventilation
looks like this:
The speed can be set are:
•
Minimum speed
•
Average speed
•
Maximum speed
•
Automatic regulation (auto‐mode)
With the up and down arrows you choose the speed, with the green button you confirm the value set.
3.4.2.1
TOOLBAR OPERATION FANCOIL AREA
In the left scroll sidebar there are icons that symbolize the active/activable functions in the fan coil zone considered. In particular:
Colourful icon = function enabled,
Faded icon = function unit configured but not currently active.
Below there is a table with icons that may appear in the scroll side bar.
The presence or absence of the icon in the sidebar will be determined by the enable or disable of the function which you refer on
board the fan coil unit.
ORDER OF APPARANCE
1
2
3
Table 2. Order of appearance of the icons in the toolbar on the fan coil.
Figure 13. Ventilation speed configuration.
ICON
FUNCTION
WINDOW SWITCH
DOUBLE SET‐POINT
HUMIDITY CONTROL
14