Table of Contents
Advertisement
13. Due to the radius server IP problem (set wrong/inexistence radius server IP),SNMPc
should send trap(s) "RADIUS server not reachable" for each time user try to re-logging
through Radius server (not only display the trap once)
14. When create policy route and the destination interface include DUT's management IP,
then telnet or use web to DUT is fail
15. The log-buffer entries display abnormal in ARP inspection log-buffer function. The number
of total number of logs is over setting number.
16. Set mirror port direction is adding or removing, not over writing .
17. In bandwidth control, the received rate in connected port should follow egress setting in
egress port, not ingress port setting.
18. In VLAN stacking, mirror the access port and the direction is both, the ether type in
connected port should be 8100, not 9100.
19. In ipv6 static route, the prefix length only configure ＜= 64, not configure ＞64.
20. In maximum ipv6 static route, after backup and restore the configure file or reboot device,
the last L3 ipv6 traffic could not forward to the next hop. After a period of time (>30
seconds), the last L3 ipv6 traffic can forward to the next hop.
21. Send continuous ipv6 traffic to next hop via ipv6 static route, it could not send to next hop
after modifying the ipv6 static route. It must stop ipv6 traffic and modify ipv6 static route,
then send ipv6 traffic, the traffic will forward to the next hop.
22. The error is about +-10M for cable diagnostic resolution.
23. VRRP can response ping cross different routing domain. But, it could not response
traceroute.
Bug fix:
1. [ACL] When create 254 classifiers join policy rule via web, use CLI to show
running-configuring, the DUT crash.
2.
[Rmirror VLAN] In web page, create 3 Rmirror VLAN ruler, it will pop error message.
Remove 2nd Rmirror VLAN ruler, and create 3rd Rmirror VLAN ruler, the mirror port
setting will be inconsistent between CLI and Web.
3. [Logging] In show logging, system will hang up when display over 800 entries.
4. [MIB-zyxelErrdisable]The zyxelErrdisableTrapInfoObject (OID: 1.3.6.1.4.1.890.1.15.3.24.3)
table can't show any value via SNMPc or MIB Browser. (400 version is OK)
5. [MIB-zyxelIf]When using SilverCreek to create zyIfRowStatus (OID:
1.3.6.1.4.1.890.1.15.3.27.1.3.1.3) rules, it will pop "Agent returned malformed instance
identifier Index mapping rules: object identifier-valued or string-valued, variable-length
strings (not preceded by the IMPLIED keyword): 'n+1' sub-identifiers, where 'n' is the
length of the string 1 octet length sub-id for index ZYXEL-IF-MIB:zyIfId of object
ZYXEL-IF-MIB:zyIfRowStatus.1.1 does not match availabe subids." error message.
6. [MIB-zyxelIgmp]DUT doesn't support the zyxelIgmp (OID: 1.3.6.1.4.1.890.1.15.3.29)
function. Please remove it.
7. [MIB-zyxelLoadSharing] When getting and setting the zyxelLoadSharing (OID:
1.3.6.1.4.1.890.1.15.3.44) table, DUT will crash.
8. [MRSTP+LACP] The MRSTP with LACP didn't work when unplug/plug port.
9. [System] The DUT will crash when MRSTP+LACP test.
10. [MIB-zyxelRip] When setting the zyRipDistance (OID: 1.3.6.1.4.1.890.1.15.3.74.1.2), DUT
will crash.
11. [MIB-zyxelSnmp] The zySnmpTrapDestinationRowStatus (OID:
1.3.6.1.4.1.890.1.15.3.76.1.5.1.5) can't be created via SNMPc or MIB Browser.
12. [MIB-zyxelTransceiver] The zyxelTransceiverDdmiTable (OID:
1.3.6.1.4.1.890.1.15.3.84.1.2) can't show value correctly via SNMPc.
13. [MIB-zyxelVlanStack] The zyxelSelectiveQinQTable (OID: 1.3.6.1.4.1.890.1.15.3.89.1.4)
can't be set via SNMPc or MIB Browser.
14. [IPSG] When show maximum IPSG entries, CLI will hang up.
15. [MAC-Pinning] When send ARP packet, then mac-pinning function fails.
16. [MIB-transmission] The dot3StatsTable (OID: 1.3.6.1.2.1.10.7.2) table doesn't show any
value via SNMPc or MIB Browser.
17. [RMirror] The LED still bright after erase running-configuration.
Advertisement
Table of Contents
