Table of Contents
Advertisement
Bug fix:
1. [FCIR_20131205_0001] [FCIR_20131216_0001] Power off and power on the device
during system reboot process, all port will be inactive in show running. It seems that rom
file is broken.
2. [FCIR_20131216_0002] Errorlog message is not correct for hardware monitor FAN error
3. [FCIR_20131217_0001] When checksum of firmware image 1 is error, switch does not
change to image 2.
4. [FCIR_20131226_0001]
LLDP is disabled.
1. In "LLDP Port Information" web page, all port's "Port ID" are showed 1.
2. In "LLDP Local Port Status Detail" web page, all port's "Port ID" are showed 1.
3. In LLDP Local Port Status Detail, some filed status should show "No", not
show "Yes".
5. [FCIR_20140117_0001] ARP packet send back to incoming port, makes CISCO switch
have a MAC Flapping log.
6. [FCIR_20140205_0001] Use Web to configure MLD snooping leave mode per port,
immediate mode and Fast mode are inconsistent between CLI and WEB.
7. [FCIR_20140205_0002] In spanning tree and static trunk environment, the host's mac will
be learned to wrong port.
8. [FCIR_20140217_0001] Send IGMP join packet. Keep the group alive. Show technical
support overnight. The DUT happen memory leak
9. [FCIR_20140218_0001] When group two or more ports and just link up one of these ports,
DUT sends two or more different LLDP packets on the same port.
10. [FCIR_20140218_0002] DHCP relay stopped working
11. [FCIR_20140226_0001] When we use ipv6 link-local URL to access the switch web UI on
windows XP, pages with indirect URL are unaccessible. User cannot access the error.html
when configuration is wrong. Also, user cannot upgrade firmware via ipv6 link-local
address and will cause huge memory leak in this environment (after firmware upgrading,
check 'sys memu usage' in zynos mode).
12. [FCIR_20140313_0001] CLI will be hung when set "sys stdio 0" in zynos mode with
console, but telnet is OK.
13. [FCIR_20140317_0001] Send two lldp packets (with system description length = 255) to
an lldp enabled port will cause DUT crash.
14. [FCIR_20140401_0001] Upgrade firmware which syslog size is modified(ex. FCS+2 to
FCS+3), switch will crash after reboot twice
15. [FCIR_20140403_0001] When trunk responsible port is link down and edge port is
disabled, add new trunk group member and enable RSTP, the ports will loop.
16. [FCIR_20140409_0001] When enabled IGMP snooping, IGMP general query received by
DUT will be replaced with its own source mac.
17. [FCIR_20140410_0001] When IGMP snooping of switch is configured with: 1. fast leave
mode or 2.normal leave mode with IGMP snooping querier enabled and no IGMP
report-proxy, once it receives a IGMP leave packet, it sends out group-specific queries
without source MAC address (source MAC = 00: 00: 00: 00: 00: 00).
18. [FCIR_20140411_0001] User can't be authorized when privilege of account is Cisco
attribute and privilege level is 15.
19. [FCIR_20140411_0002] When enable igmp-snooping, DUT will reset report-proxy when
receiving Group-Specific Query (GSQ).
20. [FCIR_20140424_0001] LLDP-MED doesn't work with IP phone
21. [FCIR_20140425_0001] DUT crash after restore MAX VLAN configuration
22. [FCIR_20140425_0002] For creating script for MIB testing, length of MLD snooping proxy
port list is different from GS3700.
23. [FCIR_20140428_0001] When trunk responsible port is link down and edge port is
disabled, add new trunk group member and enable RSTP, the ports will loop.
24. [FCIR_20140506_0001] If subtype of remote PortId is mac-address. It can't be showed on
lldp remote device information.
25. [FCIR_20140514_0001] LLDP task will stop and make the LLDP packet can't send out
periodically.
26. [FCIR_20140520_0001] Write memory, upload firmware and something need write rom
may cause system hang.
27. [FCIR_20140521_0001] DUT crash when do no multi-login via TELNET/SSH.
Advertisement
Table of Contents
