General Terms; Symbols; Responsibility For Atex Certification - Scope Of Supply - SPX FLOW APV DELTA DKR2 Instruction Manual

APV
APV_DKR2 ATEX_UK-0_022018.indd
Double Seat Ball Valve DELTA DKR2
ATEX Design
Instruction Manual: UK-0
1.

General Terms

This instruction manual applies for the double seat ball valve range
of the DKR2 series in the nominal dimensions DN 25-100, 1"-4" for
use in specific ATEX applications (according to Directive 2014/34/
EU).
The valve must only be assembbled, operated, disassembled,
maintained and serviced by trained personnel. Please contact your
local SPX FLOW representative if required.
This instruction manual must be read and observed by the
responsible operating and maintenance personnel.
We point out that we will not accept any liability for damage or
malfunctions resulting from the non-compliance with this instruction
manual.
Descriptions and data given herein are subject to technical changes.
1.1.

Symbols

This symbol draws your attention to important directions which have
to be observed with regard to the operation in explosive areas.
This technical safety symbol draws your attention to important
directions for operating safety. You will find it wherever the activities
described are bearing health hazards or risks for persons or
material assets.
1.2. Responsibility for ATEX certification - scope of supply
SPX FLOW will be held responsible only for the valves supplied
and selected according to the operating conditions indicated by the
customer or end user and as stated in the order confirmation. If in
doubt, contact your SPX FLOW partner.
All other assembled equipment and devices must have a separate
certification, provided by the supplier(s) of that equipment and
devices, of at least the same or higher grade of protection as the
valve supplied by SPX FLOW. The complete unit must be certified
separately by the final assembling manufacturer and must have a
separate name plate supplied by the unit manufacturer.
UK
2